# Condition

In general tab select the stage Condition

![](https://531923687-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnhvnNmu6p9CSODwQTjgf%2Fuploads%2FiB6wfwK6naPUjRzxbi6U%2F0.png?alt=media)

In the condition stage, click on the configure to set the condition

![](https://531923687-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnhvnNmu6p9CSODwQTjgf%2Fuploads%2FynnrTQkMgxSvr9ZwwZyK%2F1.png?alt=media)

Configure the condition and click on Ok

![](https://531923687-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnhvnNmu6p9CSODwQTjgf%2Fuploads%2FqEj7aFOKpIgqC4591fbY%2F2.png?alt=media)

After adding a condition configure the next stage

To add a stage click on the stage

![](https://531923687-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnhvnNmu6p9CSODwQTjgf%2Fuploads%2FRthYpgGWy2dPCbbYHDPA%2F3.png?alt=media)

Select the update record stage

If the condition will fulfill, the record will updated

![](https://531923687-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnhvnNmu6p9CSODwQTjgf%2Fuploads%2FzxmpxG6nMKgeAKQN3Yov%2F4.png?alt=media)

In update record add the stage name and click on configure

![](https://531923687-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnhvnNmu6p9CSODwQTjgf%2Fuploads%2FuWRIwyc8afUS5VuAoFMk%2F5.png?alt=media)

Configure the stage and click on Ok

![](https://531923687-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnhvnNmu6p9CSODwQTjgf%2Fuploads%2FNlPPPDd2swWSYhbY9SxC%2F6.png?alt=media)

Go to finish tab

![](https://531923687-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnhvnNmu6p9CSODwQTjgf%2Fuploads%2FHpVDHVeWFctACdPN25Xz%2F7.png?alt=media)

Click on finish and save the workflow

![](https://531923687-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnhvnNmu6p9CSODwQTjgf%2Fuploads%2F237DXFTJL5yLe5pbUNgr%2F8.png?alt=media)